- Homepage
- >
- FAQ
FAQ
What type of files can I send to AG DESIGN?
We recommend saving as a .PDF. You may also send the file in the following types: jpg, jpeg, tif, tiff, eps, and png.
We prefer that you send .PDF with embedded or outlined fonts. .PDF’s are easier to handle and will likely speed up your turn-around. Remember to flatten your files before uploading.
We prefer that you send .PDF with embedded or outlined fonts. .PDF’s are easier to handle and will likely speed up your turn-around. Remember to flatten your files before uploading.
What color mode should my files be?
If you send us an RGB file, there is a chance that a color shift may occur and you may not be satisfied with your job.
You should always start and finish your designs in CMYK color mode.
You should always start and finish your designs in CMYK color mode.
What resolution should my file be?
Low resolution files may be printed as is or will be placed on hold until we receive new files, slowing your turn-around.
We only accept 300 dpi files and no less.
We only accept 300 dpi files and no less.
How should I set up my bleed?
Bleed must extend past the cut-line and will be trimmed from the product during the final cutting phase. When the image is required to extend all the way to the edge, bleed is needed to preserve the finished look and the quality of the final product.
Please keep all text at least 0.125″ inside the cut-line.
Please keep all text at least 0.125″ inside the cut-line.
- The bleed for Standard Products is 0.125″.
- The bleed for Booklets and Presentation Folders is 0.25″.
- For Signs and Banner Products, please contact AGDesign for individual substrate guides.
